New internal stock adapter for the Saiga and AK stamped receivers. For use with popular after market stocks such as the Tromix SGP44 and ACE “Skeleton Stocks”

IN STOCK

Comes complete with ambidextrous slide and pins. This will allow you to upgrade the “Lefty” to a full ambidextrous adapter.

Comes complete with lock tab, ambidextrous slide, spring and pins. This will allow you to repair or replace and worn parts.

This adapter allows the use of AR15/M16 magazines to be used in the AK47 platform (Saiga, WASR3 and Norinco .223s). The adapter features a ambidextrous mechanism for left and right hand “Drop Free” release. Constructed of T6061 Aluminum and Mil-Spec hard anodized.
*Modification to the trunnion may/will be needed
*Does not count towards 922r compliance

IN PRODUCTION

Left Hand Release Only!!!!

You must purchase rebuild kit or ambidextrous right slide to make right hand release work. Available below in the featured section.

This adapter allows the use of AR15/M16 magazines to be used in the AK47 platform. This includes Saiga, WASR3, Norinco and other popular AK rifles. The adapter features a  left hand “Drop Free” release. Constructed of T6061 Aluminum and Mil-Spec hard anodized.
*Modification to the trunnion may be needed
*Does not count towards 922r compliance

IN PRODUCTION

This adapter allows you to utilize popular metal and polymer .223 AR15 magazines in Galil platform. The adapter features a ambidextrous mechanism for left and right hand “Drop Free” release. Constructed of T6061 Aluminum and Mil-Spec hard anodized.
*US made Galil clone receivers are reported to not be in spec (properly milled to IMI spec in the receiver magazine well) and may require your rifle to be updated to IMI spec to use this adapter.
*Does not count towards 922r compliance

IN PRODUCTION

Product Features

• Main Compartment: 18″(H) x 9.5″(W) x 4.75″(D)
• Secondary Compartment: 16″(H) x 8″(W) x 3″(D)
• Upper Front Pouch: 4″(H) x 7″(W) x 2.5″(D)
• Lower Front Pouch: 10″(H) x 7″(W) x 2.5″(D)
• Weight: 3.04 lbs
• Capacity: 1520 cu. in. / 25 liters
• Hydration: Up to 100oz Bladder
• Support: 1″ Sternum Strap, 1.5″ Waist Belt (min 9″ strap alone / max 42″ strap alone; min 19″ loop / max 52″ loop)

Fenix’s TK-series remote pressure switch has four internal sensors with a steel spring-switch module for consistently reliable operation.  The switch cable can extend up to 80cm and activates with just slight finger pressure.  Pressure pad cover rated for 100,000 cycles, and switch rated for 1A electric current. 

Compatible with Fenix models TA20, TA21, TK11-R5, TK12, TK15, and TK30

The Fenix TK11 features a powerful, tough, durable, and fully-waterproof design intended for harsh outdoor conditions.  Operating on two CR123A lithium batteries or one 18650 li-ion battery, the two level dimmer function makes a perfect combination of extreme brightness and ultra-long runtime.  The innovative side dimmer operation is very simple and easy to use.

Side dimmer button with 2 brightness levels:      

   General:48 lumens, 12 hours     

   Turbo: 258 lumens, 2 hours 42 minutes

The Fenix TK15 features a powerful, tough, durable, and fully-waterproof design intended for harsh outdoor conditions.  Operating on two CR123A lithium batteries or one 18650 li-ion battery, the multi-level dimmer function makes a perfect combination of extreme brightness and ultra-long runtime.  The innovative side dimmer operation is very simple and easy to use.

 Side dimmer button with 4 brightness levels:        

   Low: 5 lumens, 152 hours       

   Medium: 47 lumens, 23 hours        

   High: 143 lumens, 6 hours 25 minutes        

   Turbo: 337 lumens, 1 hour 50 minutes   

The Fenix TK21 features a powerful, tough, durable, and fully-waterproof design intended for harsh outdoor conditions.  Operating on two CR123A lithium batteries or one 18650 li-ion battery, the multi-level dimmer function makes a perfect combination of extreme brightness and ultra-long runtime.  The innovative side dimmer operation is very simple and easy to use.

Side dimmer button with 4 brightness levels:       

   Low: 5 lumens, 220 hours      

   Medium: 58 lumens, 16 hours       

   High: 180 lumens, 5 hours 10 minutes       

   Turbo: 468 lumens, 1 hour 50 minutes  

Manufactured in the US by TAPCO
Dependable Functionality
Lifetime Guarantee
Counts as 3 Sec 922r Compliant Parts

IN STOCK AVAILABLE FOR PURCHASE

This includes the hammer, trigger, and disconnecter along with a new disconnecter spring and a Bulgarian style retaining wire. Counts as 3 Sec 922r Compliant Parts

*The angle on the hooks have been designed for smoother cycling of the rifle.
*The trigger face is grooved for improved handling in less than optimum conditions.
*The hammer face has been designed for smoother operation.
*The disconnector has been designed for smooth operation with no “trigger slap”